Fujitsu SPARC T5440 Uživatelský manuál stáhnout pdf (Strana 158)

132 SPARC Enterprise T5440 Server Service Manual • July 2009

■ “Servicing the Fan Tray Carriage” on page 129

▼ Remove the Hard Drive Backplane

Before you begin, complete these tasks:

■ Read the section, “Safety Information” on page 59.

■ Power off the server, using one of the methods described in the section, “Powering

Off the System” on page 63.

■ “Extend the Server to the Maintenance Position” on page 66

■ “Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 69

■ “Remove the Top Cover” on page 69

■ “Remove a Hard Drive” on page 77

Note – You must remove all four hard drives from the server. Note the location of

each hard drive you remove. You must re-install each hard drive in the correct bay.

■ “Remove a Fan Tray” on page 83

Note – You must remove all four fan trays.

■ “Remove the Fan Tray Carriage” on page 129

Do the following:

1. Remove the flex cable retainer.

Loosen the captive No.2 Phillips screw and lift the retainer up and out of the

chassis.

2. Unplug the cable from the hard drive backplane.

3. Loosen the three captive No. 2 Phillips screws.

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 213 214

Žádné komentáře

Fujitsu SPARC T5440 Uživatelský manuál Strana 158