Fujitsu Solaris PCI GigabitEthernet 3.0 Uživatelský manuál stáhnout pdf (Strana 42)

3.3 Operation Mode Setup

parameter status meaning

lp_10fdx_cap Read only

The link-partner has been set to

10Mbps/FullDuplex by Auto-Negotiation.

0 : Invalid

1 : Valid

lp_10hdx_cap Read only

The link-partner has been set to

10Mbps/HalfDuplex by Auto-Negotiation.

0 : Invalid

1 : Valid

lp_100fdx_cap Read only

The link-partner has been set to

100Mbps/FullDuplex by Auto-Negotiation.

0 : Invalid

1 : Valid

lp_100hdx_cap Read only

The link-partner has been set to

100Mbps/HalfDuplex by Auto-Negotiation.

0 : Invalid

1 : Valid

lp_1000fdx_cap Read only

The link-partner has been set to

1000Mbps/FullDuplex by Auto-Negotiation.

0 : Invalid

1 : Valid

lp_1000hdx_cap Read only

The link-partner has been set to

1000Mbps/HalfDuplex by Auto-Negotiation.

0 : Invalid

1 : Valid

lp_pauseTX Read only

The link-partner has been set to transmit

pause frame by Auto-Negotiation.

0 : Invalid

1 : Valid

lp_pauseRX Read only

The link-partner has been set to receive pause

frame by Auto-Negotiation.

0 : Invalid

1 : Valid

lp_autoneg_cap Read only

The link-partner has been set to

Auto-Negotiate by Auto-Negotiation.

0 : Invalid

1 : Valid

role_cap Read only

The current Role setting when operating at

1000Mbps. (Not valid for

PW008GE4/PW0G8GE1/SE0X7GD2X)

0 : Slave

1 : Master

jumbo Read only

0 : JumboFrame support disabled.

1 : JumboFrame support enabled.

● About speed/duplex/flowcontrol, it recommends carrying out default operation

(Auto-Negotiation). In that case, connection partner equipment should also enable

Auto-Negotiation. By doing so, it is the optimal. speed/duplex/flow control It

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 114 115

Komentáře k této Příručce

Žádné komentáře

Fujitsu Solaris PCI GigabitEthernet 3.0 Uživatelský manuál Strana 42

Komentáře k této Příručce

Související produkty a manuály pro Hardware Fujitsu Solaris PCI GigabitEthernet 3.0