Fujitsu SPARC M3000 Uživatelský manuál stáhnout pdf (Strana 39)

C120-E360-06EN 2-13

2.6 RCI Setup for Replacement of an RCI Base Cabinet

2 Execute the setrci (8) command to initialize RCI settings.

2.6.4 Connecting an RCI cable

Connect the removed T-branch connector together with the RCI cable to the new RCI

host.

Note: Always do Confirming RCI initialization before reconnecting the RCI cable

to the RCI host.

2.6.5 Making an RCI address setting

Assign an RCI address to the new RCI host after replacement.

Make an RCI address setting on the new RCI host.

Specify the same RCI address as that assigned to the old RCI host.

• To specify an RCI address:

1 Execute the setrci (8) command, and specify an RCI address.

Specify a decimal number for the fifth and sixth digits of the target RCI address.

A decimal number in a range of 1 to 32 can be used.

XSCF> setrci -c init

The command completed successfully.

<Example> Specifying the RCI address 000102ff for the XSCF

XSCF> setrci -c set <2>

The command completed successfully.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 55 56

Žádné komentáře

Fujitsu SPARC M3000 Uživatelský manuál Strana 39